This course is designed for experienced chainsaw operators, it develops the advanced skills and knowledge required to safely fell and process trees over 380mm in diameter. Working with larger timber brings additional challenges and hazards, and this practical course will help you develop the techniques needed to carry out the work safely, efficiently and in line with current industry best practice.
Who is this course for?
This course is suitable for experienced chainsaw operators working within the following industries:
- Arboriculture
- Forestry
- Agriculture
- Woodland management
- Conservation
- Local Authorities
- Other land-based industries
Course sessions:
- HSE legislation and safety guidelines
- Starting the chainsaw and pre-cutting tests
- Felling
- Take down hung-up trees using hand tools
- Branch removal – snedding and de-limbing
- Clearing working area and work equipment checks
What will be covered?
During the course, you will cover a range of advanced felling techniques and safe working practices, including:
- Relevant health and safety legislation and industry guidance
- Site-specific risk assessment and emergency planning
- Assessing trees and worksites for hazards and environmental considerations
- Planning and carrying out the safe felling of trees over 380mm (15″)
- Assessing and safely felling leaning trees
- Making accurate felling cuts in the correct positions
- De-limbing and snedding techniques
- Cross-cutting timber to required lengths
- Understanding tension and compression in timber
- Safe procedures for releasing trapped guide bars
- Safe handling and stacking of timber
- Assessing and dealing with hung-up trees
- Selecting, checking and using take-down equipment safely
- Taking down hung-up trees using appropriate techniques
- Understanding techniques that must not be used during hung-up tree operations
What will I need?
Learners are required to bring:
- A suitable chainsaw in accordance with current HSE guidance
- Personal Protective Equipment (PPE)
- Operator’s maintenance kit
- Two-stroke fuel and chain oil
- Appropriate hand tools, such as a felling lever, timber tongs and turning strap
A full pre-course handout will be provided prior to the course.
This course culminates in an independent assessment for a LANTRA awards Level 3 Qualification in Felling and Processing Trees over 380mm.
